Garage floors
Full flake for a floor that gets parked on and hosed off, or metallic when the garage is somewhere you actually spend time.
Utah County · Salt Lake County · Cache County
We build floors made to last.
Full flake and metallic systems for garages, carports, patios, shops and commercial floors. The slab is diamond ground before anything goes on it, and every floor is sealed with a polyaspartic topcoat.
5.03 Google reviews· Recommended on FacebookWant a number on it? Call and someone comes out and stands on your slab.
Call or text (801) 441-8054Get a free estimate- Free estimates
- Residential and commercial
- Owner on site
- Filmed start to finish
Diamond ground, not etched
The epoxy keys down into the concrete
Flake packed edge to edge
Thrown by hand until no more will stick
Polyaspartic on every floor
UV stable, chemical resistant, anti scratch
5.0 stars on Google
Every one of the 3 Google reviews so far
GaragesCarportsDrivewaysPatiosFront porchesBasementsBathroomsBarbershopsSalonsOfficesShopsEvent centersShowrooms
What we coat
Concrete goes in. A floor comes out.
The same three stage system everywhere: grind, base coat with flake, polyaspartic topcoat. What changes is the space and the blend. Every photograph on this site is their own work, shot on their own jobs. There is no stock photography anywhere on it.
Carports and driveways
Outdoor concrete takes sun, salt and tyre heat. Flake gives it grip when it is wet and the topcoat keeps it from chalking.
Patios and front porches
The first thing anyone walks on. Cracks get filled, the step edge gets wrapped, and the whole thing washes clean.
Shops and warehouses
Large open slabs in solid colour or flake, scheduled around your hours so you are shut for as little as possible.
Offices, salons and barbershops
Front of house floors that get swept twenty times a day. Seamless, so there is no grout line to scrub.
Basements and bathrooms
Interior slabs where the coating has to be easy to clean and cope with standing water. Anti slip additive on request.
How each one is done
Not sure which one you need? Call (801) 441-8054 and describe the space.
The coating is the easy part. The prep is the job.
Coatings fail because of what happened before the first coat went down, not because of the coat itself. Here is the part of the job you would otherwise never see.
Diamond ground, not etched
Acid etch leaves a surface the coating can only sit on top of. Grinding opens the concrete with diamonds so the epoxy keys down into it. Cracks and pits get filled on the same pass and the slab is vacuumed before anything is mixed.
Flake packed edge to edge
Flake goes on by hand until the wet base will not take any more of it. That is what stops thin patches showing through a year later. Once it cures the floor is scraped back flat and vacuumed again.
Polyaspartic on every floor
The last coat is polyaspartic: UV stable, chemical resistant, anti scratch. It is the layer that has to live with hot tyres, road salt and a Utah winter, so it goes on the porch and the carport exactly as it goes on the garage.
Our work
Every job, filmed start to finish.
A raven flake carport, a metallic garage in West Valley City, a marble-look bathroom, a curved patio, entry steps, a side walkway and a commercial shop slab. All of it shot on site in Utah.
See the full reels on Instagram
Yard sign on a finished carport floor.
Curved patio, coated right to the edge.
Metallic garage floor. West Valley City.
Marble-look metallic, bathroom floor.
Entry steps, still taped off.
Side walkway, rail to wall.
Commercial shop base coat, with Beehive Epoxy.
Flake going down by hand, packed edge to edge.And moreEvery job, on the feedFrom the first call to the last coat.
Call or text
Say what the space is, roughly how big it is and what the concrete is doing. A photo of the slab is worth more than a paragraph about it.
Free estimate, on the slab
Someone comes out and looks at the actual concrete rather than quoting off a square footage over the phone. Anything structural or a moisture problem gets flagged here, not after.
Grind, fill, vacuum
The slab is diamond ground, cracks and pits are filled on the same pass, and the whole floor is vacuumed before anything is mixed.
Base, flake, topcoat
Pigmented epoxy base, flake thrown by hand until no more will stick, scraped back flat once it cures, then the polyaspartic. The whole thing goes up on the feed as it happens.
Built strong, clean, reliable.
Who you are hiring
A small Utah crew that films its own work.
Ghost Ridge Company LLC coats concrete across Utah for homeowners and businesses. Every reel on the feed is shot on the job by the people doing it, grinding and mess included, which is a fair way to judge a contractor before you let one into your garage.
On larger commercial floors they work alongside Beehive Epoxy. The shop base coat in the gallery above is one of those. Residential jobs are handled in house.
- Reach
- Santaquin to Logan, and the Salt Lake valley in between
- Estimates
- Free, in person, standing on your slab
- Systems
- Full flake, metallic, solid colour
- Topcoat
- Polyaspartic on every floor, inside and out
- Larger jobs
- Run alongside Beehive Epoxy
- Rated
- 5.0 stars on Google, recommended on Facebook
- Booking
- Call or text (801) 441-8054
What customers say
Five stars, in their own words.
Every review below is copied word for word off the company’s Google profile and Facebook page, from people who had a floor done. Read them where they were left.
Google rating
5.0
From 3 Google reviews, every one of them five stars. Checked 26 October 2026.
Read them on GoogleHad a floor done? Leave oneHighly recommend Angel! I shopped around and received multiple quotes, and Angel offered the best value by far. His pricing was fair, his communication was excellent, and he was always professional, polite, and responsive.
The porch turned out amazing, and the quality of the workmanship exceeded my expectations. He stands behind his work with a guarantee and made sure everything was cleaned up perfectly when the job was done.
If you’re looking for a trustworthy contractor who does great work at a great price, Angel is the one to call. Couldn’t be happier with the results! 👏🏼🙌🏼
I highly recommend Angel to anyone looking for epoxy floor coatings. He did such a beautiful job on our front porch, and we couldn’t be happier with the finished results. They were friendly, hard working and a joy to have work on our home.
Angel was amazing to work with. He was very professional and got the job done very quickly. I love our porch. It turned out amazing. I referred him to my parents and a bunch of my friends too. Thank you!!
Recommends Ghost Ridge Company LLC
I found Ghost Ridge on TikTok and sent him a DM asking for a free appraisal. We set up a time that worked, and he gave me a very fair offer.
I wanted to have both my front porch and garage done, so he gave me a quote for both. We scheduled the porch first, and it turned out amazing!
Angel is a super nice guy, and I highly recommend this company if you’re in need of his services.
One floor, written out
The carport, listed the day it was finished.
This is the carport at the top of the gallery, exactly as it was posted. Every floor gets built in the same order. The blend and the base colour are what change.
System
Raven Flake
The house flake system
Base
Black epoxy
Rolled onto the ground slab
Broadcast
White and grey flake blend
By hand, until no more will stick
Topcoat
Polyaspartic
UV stable, chemical resistant, anti scratch
Location
Utah
Outdoor slab, open to the weather
Where we work
Santaquin to Logan, and everywhere between.
Based in the Salt Lake valley and working the whole Wasatch Front. Every town has its own page, and if yours is not on the list, ask anyway.
Free estimate
Tell us about the floor.
The space, roughly how big it is and what the concrete is doing now is enough to start with. Someone comes out, stands on the slab and gives you a number. Still deciding? Read the straight answers first.